ECM Profitec Heater 1400W 230V incl. Teflon Disc & Gasket

ECM / Profitec heating element 1400W 230V incl. gasket & Teflon washers

What makes this heating element special?

This original heating element for ECM and Profitec espresso machines is delivered by us directly including a new heating gasket and matching Teflon washers.

When replacing the heating element, the gasket and Teflon washers should always be renewed. Only then can optimal sealing of the boiler be ensured. The Teflon washers also prevent the heating lugs from warping when tightening the screws and ensure even surface pressure.

This provides you with a complete repair kit for a professional and durable replacement.

Who is this heating element suitable for?

This heating element is suitable for owners of ECM and Profitec espresso machines with stainless steel boilers, where:

• the heating element is defective

• the machine no longer heats up

• the RCD trips

• the heating performance has significantly decreased

• a major maintenance is carried out

Our assessment from workshop and service

In our workshop, we never replace heating elements without a new gasket and Teflon washers.

The old gasket loses its elasticity over time and often no longer seals reliably after removal. The Teflon washers are a frequently overlooked but important part of the assembly. They ensure that the heating element can be mounted without stress and remains permanently sealed.

That’s why you get all the necessary parts directly in a set from us.

Advantages

✓ Original ECM / Profitec spare part

✓ Includes new heating gasket

✓ Includes Teflon washers

✓ Optimal fit

✓ Durable design

✓ Ideal for professional repairs

✓ Prevents unnecessary reorders

Technical data

Heating element

• Power: 1400 watts

• Voltage: 230 volts

• Design: 2-pole

• Immersion depth: 87 mm

• Hole spacing: 58 mm

• Flange diameter: 54 mm

Teflon washers

• For M8 screws

• Material: PTFE / Teflon

• Thickness: 4 mm

Compatible machines

Suitable for numerous ECM and Profitec models with stainless steel boilers and corresponding heating mounts.

Among others:

ECM

• ECM Technika IV
• ECM Technika IV Profi
• ECM Mechanika IV 
• ECM Mechanika IV Profi
• ECM Mechanika Max 
• ECM Controvento (steam boiler)
• ECM Elektronika Profi (model dependent)
• ECM Synchronika I & 2 (brew boiler)
• ECM Mechanika V, VI & Slim PID

Profitec

• Profitec Jump
• Profitec Pro 300
• Profitec Pro 400
• Profitec Pro 500
• Profitec Pro 700 (steam boiler)
• Profitec Pro 600 (model dependent)
• Profitec Drive (model dependent)

• Important note: Depending on the year of manufacture, different heaters may have been installed. Please compare the technical data before ordering or contact our service.

• Why are Teflon washers needed?
• ECM and Profitec install Teflon washers in the heating ears to prevent them from warping when tightening the M8 screws.
• Together with a new heating gasket, this achieves an optimal surface seal and significantly reduces the risk of leaks.

• Frequently Asked Questions (FAQ)
• Does the heating gasket need to be replaced as well?
• Yes. We recommend replacing the gasket with every heater change.
• Why are the Teflon washers needed?
• They prevent warping of the heating ears and ensure an even seal.
• How do I recognize a defective heater?
• Typical signs are failure to heat up, tripped fuses, or significantly extended heating times.
• Can I replace the heater myself?
• The replacement should only be carried out by technically skilled persons or professional workshops.

• Comparison to alternatives
• Many dealers only offer the heating element.
• At Barista You, you receive the heater directly including the matching gasket and Teflon washers. This way, you have all the components needed for the replacement immediately at hand and avoid unnecessary reorders.

• Application examples

• Replacement of a defective boiler heater

• Troubleshooting heating issues

• Repair of steam boilers

• Preventive maintenance of older machines

• Professional workshop repairs